Dry Powder

CO₂

Foam

Water

This is a fire fighting system which automatically control and extinguish any fire as quickly as possible. This can be done by the use of fire sprinkler system, gaseous fire suppression, and condensed aerosol fire suppression This system can be installed mainly in server rooms, highly Volatile chemical store rooms etc. An effective example is the INERGEN Fire Suppression System.

It is a Fire Fighting system with a highly pressurized water flow to increase the capacity of such buildings to fight fire. This high pressure water is made available through galvanized pipes (painted red) or underground HDPE pipes at the Valves. High Pressure water is let out through Fire Hoses and Hose Reels. The system is either connected to the main municipal Water Hydrant Supply or Fitted with a Fire Pump and an adequate water reservoir.

(Registered as a Fire Protection Service Provider/ Contractor by GNFS) A fire alarm system is a set of devices operating together to detect and send warning signals automatically via visual and audio devices. Depending on the environment, threats of Fire can be detected by way of smoke, flame, carbon monoxide, LPG and heat. These alarms may be activated or triggered manually by devices such as manual call points or pull stations. These operations of the Fire Alarm System may be coordinated by a Control Panel which indicates the specific areas of fire threats to facilitate prompt and effective fire fighting.

There are two main Modes of Fire Detection- Conventional and Addressable.

Conventional – Detectors are grouped into zones on the control Panel

Addressable– Each Detector is indicated on the control Panel

There is also Wireless Fire Alarm System

This system can be installed in Domestic, Commercial and Public properties